Services

 

Have you been looking for information on What Would Cause My Electric Water Heater to Stop Working??

Lots of contemporary houses utilize an electric hot water heater for their heating system, as a result of its ease and convenience of use. Nonetheless, similar to any other electrical devices, problems may arise with its usage, all of a sudden. It can be truly discouraging to awaken to a chilly shower rather than a hot one or having your bathroom with water that isn't warm sufficient and even also warm. Whatever the case might be, hot water heater problems can be rather nerve-racking. Fortunately, we have actually made a listing of possible options to your water heater concerns. There are a variety of factors that can create much of these problems, maybe a problem with the power supply, the electric heating element, or the thermostat. Prior to doing anything, ensure you switch off the primary power supply for security. Whatever the problem is, getting it taken care of should not posture excessive of a concern if you follow these actions:

 

Call A Professional:

If after changing all malfunctioning parts and also resetting your temperature, the hot water heater still isn't working, you may require to get in touch with a specialist plumber for an expert point of view. The issue with your heater could be that the cold and hot faucets have been changed or it might be undersized for the amount of warm water required in your home. Whatever the instance might be, a professional plumber would help address the problem.

 

Examine Your Power Supply:

As basic as this might appear, it is very necessary. Without sufficient power, your hot water heater will not function. So the first thing to do when your water unexpectedly retires is to confirm that it isn't a power issue. Inspect if the fuse is burnt out or the circuit breaker tripped. If the breaker is the problem, simply turn it off and on once more. Change any type of busted or damaged fuse. Test the home appliance with power after these adjustments to see if it's now working.

 

Examine Your Thermostat:

If your hot water heater still isn't working or the water coming out isn't warm sufficient, you might require to check the temperature settings on your upper thermostat. Make sure the breaker is turned off before doing anything. Open the gain access to panel as well as press the red switch for temperature reset above the thermostat. This need to assist warm the water. Turn the breaker back on as well as inspect if the trouble has been dealt with.

 

Inspect the Burner in the Hot Water Heater:

If it's not a power trouble, then try looking into your burner if it is still functioning. Examine each of your burner to ensure the trouble isn't with any one of them. If any one of them is faulty, change that part and after that inspect whether the hot water is back on.

 

Final thought

Hot water heater issues are not always significant. Most of them are because of small concerns like a blown fuse or worn-out burner. Changing the damaged components should do the trick. Nevertheless, if you are still not able to address the problem, give a call to your nearby plumber to come to get it fixed.

 

Common Reasons Why Your Hot Water Heater Isn’t Working

 

Water Gets Too Hot

 

Ouch! You wanted a hot shower, not boiling! If you have a newer model electric water heater, your water heater works with a thermostat (actually, two thermostats). If this thermostat has been jostled — or purposely reset — by someone in your home, the water flow will be much hotter than you expected.

FIX: Adjust the thermostat to a more moderate setting for producing hot water. Forty-nine degrees Celsius is recommended to prevent scalding.

 

Water Doesn’t Get Hot

 

This is the opposite of the previous problem, but it’s almost as bad. Your flow of hot water is merely lukewarm or even incoming cold water. Once again, an incorrect thermostat setting, or a faulty thermocouple in a gas water heater, could be to blame. Another explanation might be that there’s no power to the water heater (in the case of an electric heater) or the pilot light has gone out (if you have a gas unit).

FIX: Adjust your thermostat as necessary. If that doesn’t do the trick, check the power supply. Another possibility is the replacement of a damaged thermocouple in gas water heaters.

 

Leaking Water Heater

 

A leaking water heater (a sign may be low hot water pressure, or not enough hot water to shower) might be a reason to push the panic button… but first, take a few minutes to check where the leakage is coming from. Leaks near the top of the heater tend to indicate a problem with a valve, which won’t need a major repair. However, a leak from the water heater base is more serious.

FIX: You may need a qualified plumber to replace your drain valve or TPR (temperature pressure relief) valve. When your water heater is leaking from below, your plumber might be able to fix it if you call them soon enough. Otherwise, you will need to have a new water heater installed.

 

Noisy Water Heater

 

Sometimes your water heater might make some peculiar noises, loud enough to compete with your singing in the shower. Are these a cause for alarm? It depends on exactly what kind of sounds you are hearing. Sizzles and rumbles are both red flags, indicating a heavy sediment buildup in your hot water tank that might cause a breakdown in the near future. In addition, banging is a sign of a water hammer, which can lead to serious damage to your pipes.

FIX: To stop sizzling or rumbling, turn off the tank and have it flushed by a reliable plumbing company ASAP. Ask your plumber to install a water hammer arrestor to quiet down the banging and save the pipes.

 

Pilot Light Keeps Going Out

 

Many pilot lights go out once in a while, but when your water heater pilot light keeps going out continually, it’s a problem. And the chances are good that that problem stems from either a shortage of combustible air or a malfunctioning thermocouple.

FIX: Increase the air supply around your water heater by cleaning dust and lint off the appliance and clearing any clutter from the area around it. A bad thermocouple will require expert plumbing repair and is more than basic gas water heater troubleshooting.

 

Water Smells Bad

 

The water from your residential plumbing pipes should smell neutral. If it has a strong unpleasant odour, something’s wrong. To check whether your water heater is at fault, turn on a hot water faucet and let it run for a few minutes. And, yes, use your nose to determine exactly what you are smelling.

FIX: For a garlicky odour, relight the pilot light on your water tank. When you detect the scent of garbage, you’ll need a professional plumber to flush the hot water tank and possibly replace the anode rod. A strong smell of rotten eggs could signal a hazardous gas leak; turn off the gas supply if possible, get everyone out of your house, and make an emergency call to the gas company.

 

Water Looks Brown Or Rusted

 

The first thing to do is ask yourself, “Is the brown, rusty-looking water coming only from my hot water taps?” If the answer is yes, then most likely, either the anode rod or the water heater interior is starting to rust, especially if your hot water heater is nearing the end of its life expectancy. (A “no” answer means the issue does not originate from the hot water heater but rather from the water supply.)

FIX: Contact a plumber to inspect the water heater. If you catch the problem quickly enough, it might be fixable. Otherwise, you’ll need a water heater replacement. Consider installation of an efficient new tankless water heater.

https://www.huskyair.com/blog/hot-water-heater-isnt-working/

 

As a serious person who reads about Hot Water Heater Repair, I assumed sharing that excerpt was important. Sharing is nice. Helping people is fun. Thank-you for taking the time to read it.

Fix today, not tomorrow!